Table of Contents
Summary
- Compatible with: K1C, K1 MAX, Ender 3 V3, Ender 3 V3 Plus, Ender 3 V3 KE, Ender 3 V3 SE.
- Filament diameter: 1.75mm
- Maximum printing temperature: 300°C
Volumes & Dimensions
Nozzle Identification
| Diameter (mm) | Dots | Abrasion resistant? | Max temperature °C |
|---|---|---|---|
| 0.40 | 3 | Yes | 300 |
Volumetric Flow Rates
| Nozzle Diameter | Filament and Temperature | Volumetric Flow Rate (mm³/s) |
|---|---|---|
| 0.4 | PLA 220 | 22 |
| 0.4 | PETG 240 | 37 |
| 0.4 | ASA 260 | 41 |
| 0.4 | PLA+ 220 | 45 |
Filter by Filament Type:
Filter by Nozzle Diameter:
Slicer Profiles
Cleaning Guidelines
Recommended cleaning methods
- Nylon cleaning filament (internal cleaning method)
- Warm pull (internal cleaning method)
- Cold pull (internal cleaning method)
- Brass brush (external cleaning method)
Non-recommended cleaning methods
- Needle (internal cleaning)
- Steel wire brushes (external cleaning methods)
- Blow torch (internal/ external cleaning method)