RapidChange Revo Support

6.png__PID:517fbfd7-a642-4100-9ec1-8900965cfce2

Revo Six/ MK3

7.png__PID:7fbfd7a6-42b1-40de-8189-00965cfce224

Revo Micro/Mini

2.png__PID:70807a87-517f-4fd7-a642-b100dec18900

Revo CR/ Sprite

1.png__PID:b870807a-8751-4fbf-97a6-42b100dec189

Revo Voron

3.png__PID:807a8751-7fbf-47a6-82b1-00dec1890096

Revo Hemera XS

4.png__PID:7a87517f-bfd7-4642-b100-dec18900965c

Revo Roto

Revo CR Summary

  • Max Printing Temperature: 300°C
  • Mass: 30g
  • Temperature sensor type: Creality thermistor
  • Motor voltage: 12V or 24V
  • Wattage: 40W
  • Filament Diameter: 1.75mm

Performance Characteristics

  • Maximum ambient printing temperature: 40°C

Mounting Guide

Mounting Guidance Revo CR.svg__PID:3dd56452-07d8-416f-abbb-7a14ae2ca270
  • Mounting type: M3 x 0.5
  • The screws from your existing Creality HotEnd can be used to mount Revo CR.

Cable Orientation

  • Turn Revo HeaterCore anti-clockwise to orient cables. Turning clockwise will cause the spring to disengage.

Connections

  • Heater: Molex Micro-Fit 3.0, 2 pin horizontal
  • Temperature sensor: Molex Micro-Fit 3.0, 2 pin horizontal
  • Assembly is supplied with 1m cables to connect to mainboard

Materials

  • Heatsink: Aluminium (black anodised)
  • HeaterCore: Aluminia, Bronze

Exploded View

Revo CR EV.svg__PID:1cbc831d-d97d-4799-a938-379b07bd6b31

Revo Six

Revo CR

Revo Micro 

Revo Hemera XS

Revo Hemera

Revo Voron

Revo Nozzles

Revo Open Coldside