Table of Contents
Summary
- Maximum printing temperature: 320°C
- Mass: 30.5g (Assembled)
- Filament diameter: 1.75mm
- Maximum ambient printing temperature: 60°C
- Compatibility: X1E
Upgrade Guide
Volumetric Flow Rates
| Nozzle Diameter | Filament and Temperature (°C) | Volumetric Flow Rate (mm³/s) |
|---|---|---|
| 0.40 | PLA 220 | 29 |
| PETG 240 | 32 | |
| ASA 260 | 35 | |
| PC 275 | 33 | |
| 0.60 | PLA 220 | 36 |
| PETG 240 | 42 | |
| ASA 260 | 34 |
Flow Rate Comparison by Nozzle Type
The graph below provides a visual comparison of volumetric flow rates across different nozzle types, diameters, and filament materials.
Filter by Filament Type:
Filter by Nozzle Diameter:
Cleaning Guidelines
Recommended cleaning methods
- Nylon cleaning filament (internal cleaning method)
- Warm pull (internal cleaning method)
- Cold pull (internal cleaning method)
- Brass brush (external cleaning method)
Non-recommended cleaning methods
- Needle (internal cleaning)
- Steel wire brushes (external cleaning methods)
- Blow torch (internal/external cleaning method)
