Skip to product information
1 of 3

V6 All-Metal HotEnd

V6 All-Metal HotEnd


Input Diameter
Voltage and Input Type

In stock

Regular price £53.25 GBP
Regular price Sale price £53.25 GBP
Sale Sold out
Taxes & Shipping calculated at checkout.
View full details

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 300°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C), then you will need to use a plated copper heater block along with a PT100 or PT1000. Print standard materials such as PLA, PETG and ABS and high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.


Our all-metal HeatBreak maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal HeatBreak features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Composer Export1211136871454321910DescriptionBOM IDQtyCollet11HeatSink21HeatBreak31V6 HeaterBlock41M3x3 Grubscrew51DescriptionBOM IDQtyM3x8 Dome-head screw61V6 Nozzle71V6 Sock81ThermistorCartridge91HeaterCartridge103DescriptionBOM IDQtySelf Tapping Screws114E-FAN-30-30-10121Fan Duct131Collet Clip141tooltip

⚠️ WARNING: This product can expose you to chemicals including Mineral Oils, which is known to the State of California to cause cancer, and Lead and Nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. 

Read More About P65 Warnings