Table of Contents
Summary
- Compatible with: K2 Plus
- Filament Diameter: 1.75mm
- Maximum printing temperature: 300°C
Volumes & Dimensions
Nozzle Identification
|
Diameter (mm) |
Dots |
Abrasion Resistant? |
Max Temperature (°C) |
|
0.40mm |
3 |
Yes |
300 |
|
0.60mm |
4 |
Yes |
300 |
|
0.80mm |
5 |
Yes |
300 |
Volumetric Flow Rates
|
Nozzle |
PLA-HF |
PETG |
ASA |
|
Stock 0.4mm |
26 |
19 |
28 |
|
OBX HF 0.4mm |
43 |
21 |
34 |
|
Stock 0.6mm |
29 |
26 |
34 |
|
OBX HF 0.6mm |
46 |
32 |
43 |
|
Stock 0.8mm |
35 |
30 |
33 |
|
OBX HF 0.8mm |
48 |
39 |
52 |
Cleaning Guidelines
Recommended cleaning methods
- Nylon cleaning filament (internal cleaning method)
- Warm pull (internal cleaning method)
- Cold pull (internal cleaning method)
- Brass brush (external cleaning method)
Non-recommended cleaning methods
- Needle (internal cleaning)
- Steel wire brushes (external cleaning methods)
- Blow torch (internal/ external cleaning method)