RapidChange Revo Support


Revo Six/ MK3


Revo Micro/Mini


Revo CR/ Sprite


Revo Voron


Revo Hemera XS


Revo Roto

Revo Micro/Mini Summary

  • Max Printing Temperature: 300°C
  • Mass: 30g
  • Temperature sensor type: thermistor, Semitec 104NT-4-R025H42G
  • Motor voltage: 12V or 24V
  • Wattage: 40W
  • Filament Diameter: 1.75mm

Performance Characteristics

  • Maximum ambient printing temperature: 40°C
  • Lowest temperature rated component: Fan 70°C

Mounting Guide

  • Mounting type: screw thread (M12x1.5). Depth 5mm.
  • Minimum plate thickness: 1mm
  • Maximum plate thickness: 5mm
MG MINI MICRO 1.svg__PID:32dbc1ab-0c3f-448b-9301-5e2497f20b38Mounting guidance 2.svg__PID:8ea5fcf3-2d99-4aed-97f1-16604e02d11eMounting guidance 3.svg__PID:0c3fb48b-5301-4e24-97f2-0b38bc8c9308

Cable Orientation

  • Turn Revo HeaterCore anti-clockwise to orient cables. Turning clockwise will cause the spring to disengage.


  • Fan: Molex Micro-Fit 3.0, 2 pin vertical
  • Heater: Molex Micro-Fit 3.0, 2 pin horizontal
  • Temperature sensor: Molex Micro-Fit 3.0, 2 pin horizontal
  • Assembly is supplied with 1m cables to connect to mainboard


  • Heatsink: Aluminium (black anodised)
  • Nut: Nylon
  • HeaterCore: Alumina, Bronze
  • Fan shroud: Polycarbonate

Exploded View

REVO-MICRO EV.svg__PID:5872de9b-c25f-419e-8549-79390a9fecbd

Revo Six

Revo CR

Revo Micro 

Revo Hemera XS

Revo Hemera

Revo Voron

Revo Nozzles

Revo Open Coldside